Toll Free : 1800 123 8441

HomeSolutionsCentral vacuum unitsVertical Building
Vertical Building

The central units dedicated to residencial areas are the perfect solution for installations in apartment houses or small flats: with compact dimensions and versatility of installation, they can be easily installed on balconies or perimetral walls, and, with Jolly unit, they can be installed in complete houses.

Suitable for surfaces up to 3300 sq.ft.

8201.0 - Unit with accessory kit Wolly 2 m 150
8201.0 - Unit with accessory kit Wolly 2 m 150

Up to 1650 sq.ft

  • 1 user
  • 40/50 mm piping network
  • air exhaust carried to the outside
8201.0 - Unit with accessory kit Wolly 2 m 150

Wolly 2 is the innovative central vacuum unit, available in two different version, wall mounting or built-in. The features that make it revolutionary are:

  • Depth only 18,7 cm
  • Predisposed to accept pipes of Ø 40 and 50 mm
  • Equipped with cleaning kit (hose 9 m)
  • 220/240 V ac power supply
  • IP 44 protection level
  • Break valve
  • The central unit can be connected to the piping network either from the right or the left
  • Soft Start device to reduce consumption during the motor start
  • Electric control board to protect the main circuit
  • Safety thermal sensor protecting the motor, with switching off and automatic restoration in case of a malfunction
  • Protection fuse for main circuit
  • High technology fi lter, Class L, washable with water
  • Body entirely realized in plastic material, it’s shock resistant, light and long lasting
  • Simple and elegant finishing
  • Rust proof screws and bolts
  • High soundproofing level, thanks to adoption of sound absorbent devices for all unit components
  • Vacuum unit noise level below 70 dB
  • Microfiber dust bag (12 l)








8201.1 - Unit with accessory kit Wolly 2 m 300

up to 3300 sq.ft

  • 1 user
  • 40/50 mm piping network
  • air exhaust carried to the outside
8201.1 - Unit with accessory kit Wolly 2 m 300

Wolly 2 is the innovative central vacuum unit, available in two different version, wall mounting or built-in, The features that make it revolutionary are:

  • Depth only 18,7 cm
  • Predisposed to accept pipes of Ø 40 and 50 mm
  • Equipped with cleaning kit (hose 9 m)
  • 220/240 V ac power supply
  • IP 44 protection level
  • Break valve
  • The central unit can be connected to the piping network either from the right or the left
  • Soft Start device to reduce consumption during the motor start
  • Electric control board to protect the main circuit
  • Safety thermal sensor protecting the motor, with switching off and automatic restoration in case of a malfunction
  • Protection fuse for main circuit
  • High technology filter, Class L, washable with water
  • Body entirely realized in plastic material, it’s shock resistant, light and long lasting
  • Simple and elegant finishing
  • Rust proof screws and bolts
  • High soundproofing level, thanks to adoption of sound absorbent devices for all unit components
  • Vacuum unit noise level below 70 dB
  • Microfiber dust bag (12 l)








7102.1 - Built-in case Wolly 2



7102.1 - Built-in case Wolly 2

Wolly 2 built-in frame is the element that is placed at the end of the preparation of a plant for central vacuum system. It is supplied with box and closing doors. Thanks to accurate design, it integrates itself perfectly with the environment where it is installed.











7102.2 - External case Wolly 2



7102.2 - External case Wolly 2

The external case is supplied with the frame art. 7102.1 for all plants where the Wolly2 unit is not put inside the wall, but with wall hang solution.











7030.3Y - Wolly2 installation Set 3 inlets



7030.3Y - Wolly2 installation Set 3 inlets

It is the complete pre-installation set for a central vacuum system with the central vacuum unit Wolly 2 in the built version (with box and doors) and installation material for N. 3 inlets (50 mm pipes).











Solutions